Settings that are saved with a Registration can be filtered by the user via the REGISTRATION MEMORY CONTENTS screen. If something is not saving with a Registration, it is possible that that type of setting has not been selected to be saved with the Registration Memory. The user should also check the Parameter Chart on p. 25-30 in the PSR-1000/2000 Data List booklet to verify that the desired settings can be saved with a Registration.

Selecting Settings to be Saved with a Registration:

1. Press the [MEMORY] button to display the REGISTRATION MEMORY CONTENTS screen.
   
   
2. Using the [5A] and [5B] toggle buttons, select a desired Group of settings.
   
   
3. Using the [8A] and [8B] toggle buttons, put a check mark next to the selected Group to be saved.
   
   
4. Repeat steps 2 - 3 for other desired setting Groups.
   
   
5. If something is still not storing with a Registration, check the Parameter Chart on p. 25-30 in the PSR-1000/2000 Data List booklet to make sure that it is a setting which can be saved with a Registration.

Note: There is a more extensive discussion of the Registration Memory Contents screen in the lesson for Creating One-Touch Settings elsewhere on this site.

PSR-2000 Owners Manual, p. 84;  Data List, p. 25-30

PSR-2100 Owners Manual, p. 87;  Data List, p. 25-30