|
 Playing
the Organ Voices
- Press [ORGAN FLUTES] in the VOICE
section.
- You will see a screen with 10 preset
organ voices. Simply pick the organ voice, like any other
voice, and try it out.
Creating Your Own Organ
Voices
- Start by pressing [ORGAN FLUTES] to bring up the Organ
Flutes voice folder.
- Press the [SOUND CREATOR] button
in the Digital Studio. This is the same path you would use
to adjust any of the preset voices. Since you are starting
it, however, from the Organ Flutes folder, you will be adjusting
the Organ Flute voice.
- Use [BACK] and [NEXT] to select
"FOOTAGE" page.
- Use buttons [1] – [8] under display
to adjust drawbars. Each button corresponds to the typical
Organ drawbars. In the screen shot above -- the setting
for the JazzDraw! preset voice -- the 16 foot flue is set
at maximum. Pressing the [1A] button moves the drawbar upward
thus diminishing this flute until it reaches the very top.
You can see that the 5 1/3', 8', 2', 1 1/3', and 1' flutes
are entirely OFF. The 4' and 2 2/3' flutes are entirely
ON. To add some of the 8' flute, press the [3B] to add some
of the 8' flute to the sound. You can clearly hear the difference
as you move the 8' foot flute down through each of the 7
possible settings.
- Use the [B] button to change the ORGAN TYPE (Sine or Vintage).
[C] changes the ROTARY SP SPEED (Slow or Fast). [G] is for
VIBRATO (ON or OFF) and [H] is for the VIBRATO DEPTH. If
desired use [NEXT] to check out the other tab settings and
make additional adjustments.
- You will instantly hear any changes that you make, but
these changes are not saved if you turn your keyboard off
or switch to another voice. However, you can save your adjusted
voice in the USER area or on a FLOPPY DISK. Just select
the SAVE option, [I], and give your adjusted organ sound
it's own unique name. If you save your adjusted organ sound
in the USER area, it will always be there and can be selected
anywhere a voice selection is available (MAIN, LAYER, or
LEFT).
PSR-2100 Owners Manual, p.94.
|
